MS 014 Auditorium Seating
ms 014 Back and Seat Sponges
The back unit is made of 12mm beech contra carcass inside, the seat unit is internally metal frame, 55 Kg / m3 (ISO845) density is made of water-based polyurethane material in accordance with international non-flammability (ISO3795) and permanent defermosis (ISO1856) standards.
ms 014 Back and Seat Units
The back and seat units taken from the molds are completely covered with fabric. When the seat unit is out of use, it can be closed with an internal spring system.
ms 014 Fabric
100% polyester fabrics with friction resistance, non-flammability and colorfastness are used, weighing 220-280 g / m2, rubbing fastness of 50,000 cycles.
ms 014 Armrests
Metal carcass, fabric-covered decorative wooden box is used for the rails. A 20mm thick polished wooden armrest unit is integrated onto the fully fabric covered armrests.
ms 014 Support Legs and Metal Body
Back and seat upholstery is built on specially shaped double steel profile carrier legs. Metal body welding processes are made by gas arc welding and continuous welding system is applied at the joints. All metal parts are painted with electrostatic powder paint of 80 micron ± 10 thickness.
For information about Conference Seats Click here.
For order and details You can communicate.