MS 010 Auditorium Seating

ms 010 Back and Seat Sponges

Back unit with internal 12mm beech contra carcass, Seat unit with internal metal carcass, 55 Kg / m3 (ISO845) density, they are made of water-based polyurethane material in accordance with international non-flammability (ISO3795) and permanent defermosis (ISO1856) standards..

ms 010 Back and Seat Units

The back and seat units taken from hearts are covered with a complete fabric. When the seat unit is out of use, it can be closed with an internal spring system.

ms 010 Fabric

100% polyester fabrics with friction resistance, non-flammability and colorfastness are used, weighing 220-280 g / m2, rubbing fastness of 50,000 cycles.

ms 010 Armrests

Metal carcass, fabric-covered decorative wooden box is used for the rails. A 20mm thick polished wooden armrest unit is integrated onto the fully fabric covered armrests.

ms 010 Support Legs and Metal Body

Back and seat upholstery is built on specially shaped double steel profile carrier legs. Metal body welding processes are made by gas arc welding and continuous welding system is applied at the joints. All metal parts are painted with electrostatic powder paint of 80 micron ± 10 thickness.

For information about Conference Seats Click here.

For order and details You can communicate.